Route & containment
Cable trays, conduit, raceways and false-ceiling runs.
Cat6 / Cat6A, fibre, patch panels, certified
Structured Cabling
Neat, labelled, tested cabling that outlives three generations of computers — copper to every desk, fibre between floors, all terminated on patch panels.
Free site surveyEngineer visit within 48 hours
Engineers availableAcross Tamil Nadu
Genuine brandsMolex · CommScope · Legrand
Cat6A10 Gbps ready
OM3/OS2fibre backbone
Every runtested & labelled
Overview
What you get.
Cabling is the one part of your network you can’t easily replace later. We plan the routes, tray and conduit, run Cat6/Cat6A to every outlet, and terminate on patch panels in a properly dressed rack.
Every point is labelled at both ends and tested with a cable certifier, so you get a report showing each run passes — not just ‘the light comes on’.
Copper cabling
Cat6 and Cat6A UTP/FTP for data, PoE and voice.
Fibre optics
Single-mode and multi-mode backbones with splicing.
Patch panels & outlets
Keystone jacks, faceplates and loaded patch panels.
Labelling
Both ends labelled to a scheme that matches the drawing.
Testing & certification
Fluke-style certification reports for every link.
Up close
The hardware & the work.
Options
Pick what fits your site.
We recommend after the survey — but here’s what’s on the table.
Cat6 UTP
The standard for offices — 1 Gbps to every desk, 10 Gbps on short runs.
250 MHzPoE+90 m
Cat6A F/UTP
Future-proof 10 Gbps to every outlet; ideal for Wi-Fi 6/7 APs.
500 MHz10 GbpsShielded
Multi-mode fibre
Short backbone links between racks and floors.
OM3/OM410–40 GbpsLC
Single-mode fibre
Long links between buildings and across campuses.
OS2km rangeFusion splice
Process
How we deliver Cabling.
Clear steps, clean work, and a proper handover at the end.
Start with a free survey01
Survey
Outlet positions, rack location and cable routes on your floor plan.
02
Contain
Trays, conduit and raceways fixed before cable goes in.
03
Pull
Cables pulled in bundles, never kinked or over-tensioned.
04
Terminate
Patch panels, jacks and fibre splicing with neat dressing.
05
Certify
Every link tested, labelled and reported.
Repairs & service
Problems we fix every week.
Whether we installed it or not — call us and we’ll diagnose it.
Spaghetti racksUnlabelled cablesIntermittent link dropsSlow 100 Mbps linksDamaged cables in ceilingsNo spare pointsFibre link failuresMoving to a new office
Keep it running with an AMC.
Quarterly preventive visits, priority breakdown support and a single number to call — for this and every other system on your site.
Brands we install for Cabling
MolexCommScopeLegrandD-LinkSchneiderPanduitMolexCommScopeLegrandD-LinkSchneiderPanduitMolexCommScopeLegrandD-LinkSchneiderPanduit
FAQ
Cabling questions.
Cat6 is fine for most desks. We recommend Cat6A for Wi-Fi access points and anything you expect to run at 10 Gbps in the next ten years.
Yes. Every link is tested and you receive a report with pass/fail and length for each point.
Yes — we re-terminate, re-route and relabel existing cabling, usually over a weekend.
Often paired with
All services Related services.
Free site survey
Tell us about your site. We’ll do the rest.
An engineer visits, checks your space and sends a written plan with a fixed quote — usually within 48 hours.
Call us+91 81446 82241 WhatsAppChat with an engineer Emailinfo@vvdenterprises.in